Secant Cardio IIe Guía de usuario descargar pdf (Pagina 21)

Programming

Scheduling

How to schedule

CARDIO allows the scheduling of certain functions such as deterrent reminders, in addition to those main

functions which can be controlled directly.

The scheduling process is the same for all the CARDIO functions. Only the lower part of scheduling

screen will be specific to each function. It is based on the following screen:

At the start the cursor is always positioned at Monday 00:00.

Use day and time arrows to adjust the cursor to the chosen day and time. It is possible to accelerate this

process by pressing the screen as close as possible to the desired day/time: the cursor will move to this

position. Then, use the arrows to adjust the cursor exactly.

It is easy to delete any programmed schedule. Simply position the cursor on the icon and press the

“trash” button.

NOTE:

The time is adjusted in increments of 10 minutes.

ATTENTION!: For all scheduling, it is important to check the programming over the course of

the entire week. CARDIO will always give the most recently programmed schedule (unless

reactions or direct commands have occured in the interim). For instance, if a command asks for a

temperature of 65ºF (18ºC) on Monday morning at 8 a.m. (8:00) and another of 70ºF (21ºC) the same day

at 5 p.m. (17:00), the temperature will be 70ºF (21ºC) from Monday 5 p.m. until the following Monday at 8

a.m. and so on.

Time

Name of the

scheduling

Day/time setting

arrows

Day

Current day and time

of the cursor

Cursor

« trash » button

Specific section

for each functions

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 42 43

Sin comentarios

Secant Cardio IIe Guía de usuario Pagina 21